Well after the dashboard lighting was improved with LED’s after some issues with the Britpart lamp kit I fitted during the rebuild which included the plastic housings melting on the stop tail lights!

A few weeks ago i purchased Wipac LED lights for the outside of the car, 2 front side lights, 2 stop / tail lights and indicators front and back.  The kit also came with a flasher relay designed for the lower power consumption of the LED’s

The main issue with the lamps were the wiring connections that were for 300tdi + cars so I also purchased adapters to bullet connections.  Also the mounting points were 2 screws on the horizontal centre line of the light.

So I had to drill the body work for the mounting holes then removed the old lights and bolted the new ones in place and connected them up.  

There is one fault with the LED indicators that they only work if wired backwards, they work fine with indicators but the hazard switch currently isn’t working so thats something to look at.